Product Categories
  • Laboratory Products
  • Measuring & Weighing Scales
  • Plastic & Glass Labware
  • Other Products

Apparatus

  • Tap Density/ Bulk Density Apparatus

    Tap Density or Bulk Density ApparatusDigital Automatic Tap Density / Bulk Density Apparatus offered by us is designed to meet the requirements of USP Standards. This product can hold two cylinders and its capacity is 100 ml. The mechanism provides simultaneous rotating and tapping motion to the cylinders, which facilitates packing the sample under test evenly and uniformly together. Users can select the number of stokes in the counter and after selecting just press start, it will start the stokes & the display shows the number of strokes.

    • Incorporated with Advanced Microcontroller.
    • Alphanumeric display and user friendly feather touch keypad.
    • Equipped with inbuilt validation facility.
    • Non-volatile memory for storage of 24 test methods’ data.
    • Informative help prompt messages displayed, to guide user while conducting test.
    • Updated test status displayed.
    • Calculates Bulk Density, Tapped Density, Compressibility Index and Hausner Ratio
    • Simultaneous action of rotating and tapping of the cylinders.
    • Supports USP – I and USP – II. ASTM method (Available Optionally)
    • Print format as per GLP requirements.
    • Tap Setting Range: 1 – 9999 Taps
    • Tap Cylinder Drive: Stepper Motor Driven
    • Display: 20 × 4 Lines, Wide Angle, Alphanumeric Backlit LCD
    • Key Board: 4 × 4 Matrix Feather Touch Key Board
    • Parallel Port Printer Interface for Dot Matrix Printer
    • Compliant with USP Specifications
    • Power Supply: 230 ±10 V AC, 50/60 Hz, 2 Amps Max.
    • Dimensions (cm): 36 × 26 × 36
    • Weight: Nett — 17 Kg. Gross — 25 kg (Approx.)
    • Pharmaceutical and Bulk Drug Industry
    • Food Industry
    • Packaging Industry
    • Granules and Flakes Manufacturing Industry
  • Digital Potentiometric Titration Apparatus

    Digital Potentiometric Titration ApparatusThis instrument, Model: VPT-MG is designed for Aqueous / Non-aqueous, Oxidation / Reduction and many other Potentiometric Titrations. A fully Solid State Circuitry is incorporated, ensuring accurate reproducible results. The equipment is compact having a built-in magnetic stirrer with speed control and titration stand. The indicator is a digital display with range - 900 to + 900 millivolts. Since, the millivolts can be read directly on the display, the operation is simple and quick.

    The standard electrode system supplied with the equipment consists of Platinum, Glass & Calomel Electrodes. It can also be used with other metal electrodes such as Silver, Gold, Nickel, Tungsten etc. The choice of electrode system depends on the nature of titration.

    The approach of the End-Point of the titration is shown by initial digital readings of increasing magnitude and the End-Point itself is indicated by a sudden large permanent reading. In cases where the changes in millivolts in the reaction are small, the End-Point can be asserted by drawing the graph of meter reading in millivolts vs volume added. The equipment can also be used for Oxidation/Reduction Titrations. A special set pointer control for zero adjustment and to extent the millivolts range is provided in the instrument. The apparatus works on 230 Volts 50 Hz mains supply and is stabilized to overcome voltage fluctuations in the range 220 to 250 volts. The instrument is supplied with manual of operating instructions and set of accessories suitable for Potentiometric and Oxidation/Reduction Titration.

  • Friability Test Apparatus

    Friability Test ApparatusThese apparatus are easy to use & maintain for their validation facility and greater efficiency. Friablity Test Apparatus are widely used to measure the durability and abrasiveness of tablets.

    • Advanced microprocessor-based circuitry.
    • Programmable Modes: Timer or Rotation.
    • Designed with a 10° tilt feature, used when the shape or size causes irregular tumbling.
    • Magnetic Trays supplied along with the instruments to collect the tablets.
    • The two acrylic drums having a slot positioned so as to automatically discharge the tablets into the trays, at the end of the test without dismantling the drum assembly.
    • Total number of drum revolutions can be set in the range of 1 to 9999.
    • Provides connectivity to any balance via RS 232 interface to weigh the tablets before and after conducting the test. (with the use of appropriate cable)
    • Compliant with IP, BP and USP standards.
    • IQ, OQ documents will be provided with the instrument.
    • No. of drums: 2.
    • Fixed RPM: 25 RPM.
    • Accuracy: ±1 rotation
    • Timer: Settable up to 11 hrs 59min 59sec.
    • Counter (Rotation): 1 to 9999 rotations.
    • Display: 2 Line LCD Display.
    • Input: 4 × 4 Tactile Keyboard
    • Power: 220/230 V A C 50/60Hz less than 25 VA.
    • Dimensions (L × W × H): 240 × 300 × 350 mm.
    • Weight: Net - 12 Kg, Gross- 20 Kg.
    • Acrylic Drums (2)
    • Special Locking Magnetic Tray (2)
    • Operating Manual (1)
    • Optional Accessories: Abrasion Drums
  • Leak Test Apparatus

    Leak Test ApparatusExtremely "compact" construction Diaphragm type vacuum pump Polycarbonate vacuum desiccator Stainless steel (GMP) construction Vacuum level up to 22' of Hg Ideal instrument to check blister Packs, Strip for Leak Test. The old method of separate desiccator and huge vacuum pump is replaced with the new Leak Test Apparatus in GMP Stainless Steel Body with phenomenal compactness. The instrument is equipped with Diaphragm type vacuum pump gives higher level of vacuum in shortest possible time. Die pressed polycarbonate vacuum desiccator sustains vacuum for long time. A vacuum gauge is provided to indicate vacuum level which is connected ti isolation valve to disconnect the source. Thus avoiding the need of continues running of vacuum pump. 99 minute Digital timer helps the operator to do other work It's amazing compactness saves lot of valuable place in process laboratories.

    • Automatic Leak Test Apparatus can be used for quality control purposes to find leaks, holes or other such deficiencies in packaging of tablet blisters packs and strips, bottles, vacuum sealing bags and confectionary products.
    • 20 × 4 Wide angle alphanumeric display panel.
    • Equipped with Hold Time cycle ranging from 15 to 600 seconds along with Retention Time cycle which can be set for minimum of 1 second and maximum of 300 seconds.
    • The test can be formed for a set vacuum of minimum 150 mmHg and maximum 600 mmHg.
    • Apparatus can be connected to a desiccator with varied sizes ranging from 6, 10, 12 inches.
    • Vacuum level: Upto 600mmHg.
    • Hold time limit: 15 – 600 seconds.
    • Desiccator’s sizes: 6, 10, 12 inches.
    • Vacuum Stabilization Time:
      • Less than 400mmHg ± 10mmHg within 30 seconds
      • Above 400mmHg ± 5mmHg within 30 seconds
    • Instrument Body: SS 304.
    • Display: 4 Line LCD Display.
    • Input: 4 × 4 Tactile Keyboard.
    • Printer: Parallel Interface for 80 Columns Dot Matrix Printer.
    • Dimensions (L × W × H): 36cm × 36cm × 36cm.
    • Weight: 13Kg (Net).
    • Power supply: 220/230 V AC, 50/60Hz less than 25 VA.
    • Main Apparatus along with Vacuum Pump (1)
    • Polycarbonate Desiccator Body along with connecting tube (1)
    • Operating Manual (1)
  • Melting Point Apparatus

    Melting Point ApparatusProgrammable instrument designed to maintain 1°C per minute heating rate at athe time of melting point for the highest accuracy. Heating rate is precisely controlled by microprocessor circuit and is equipped with silicon Oil Bath. Suitable for determination of melting point , Melting range, Boiling points. Printer interface is provided for the printer.

    • The VMP – PM model is incorporated with magnifying lens which permits clear viewing of the sample under test on illuminated background of silicon oil bath.
    • Automatic stirrer speed controller logic.
    • The self-explanatory tactile keyboard enables the operator to adjust the speed of the stirrer and select a particular test according to the product name.
    • Facility to select melting point or boiling point test type.
    • Memory provision for storage of 99 product names with their expected melting point.
    • Memory provision for storage of 25 product names with their expected boiling point.
    • Accessorized with a graphic LCD screen displaying simple instructions for operation of the apparatus.
    • Temperature range: Room temperature + 2°C - 300°C.
    • Heating Media: Silicon Oil.
    • Accuracy: 0.3°C – 0.5°C.
    • Temperature resolution: 0.1°C
    • Heating rate: 1°C/minute (Starts from set temperature – 10°C).
    • No of capillary tubes: 1 for Melting Point/ 1 for Boiling Point.
    • Temperature sensor: Pt – 100.
    • Heater: Immersion Type.
    • Capillary: length -75 mm; Diameter: 1.4 – 1.6 mm.
    • Display: 240 × 64 Graphic LCD.
    • Input: 4 × 4 Tactile Keyboard + PS - 2 keyboard.
    • Printer: Parallel Interface for 80 Columns Dot Matrix Printer.
    • Dimension (W × L × H): 38 × 42 × 38 cm.
    • Weight: 15 Kg.
    • Power Supply: 230V, 50Hz, 500 W.
  • Tablet Dissolution Test Apparatus

    Tablet Dissolution Test ApparatusFor Routine Q.C. Tests & for Institutes. Microprocessor Based unit with large LCD display for temperature and speed indicators. Conventional model AS per USP Standards. Economical version with 6 and 8 tests available for routine analysis.

    This cost-effective instrument is specially designed for Quality Control Labs for their routine tests and is also suitable for institutes. This system (apparatus) is having most of the functions of advance version and is suitable to conduct regular routine tests.

    • The 8/6 station microcontroller based instrument is designed to conduct the test simultaneously in all vessels in similar conditions as per IP/BP/USP Standards.
    • Equipped with a large graphic LCD.
    • Incorporated with a reliable maintenance free stepper motor drive for stirrer system.
    • 25 test methods, 20 for controlled drug and 5 test methods to test SUSTAINED RELEASE Tablets with 18 different settable time intervals.
    • Dual channel system ensures accurate and precise control of temperature in dissolution vessels as well as water bath.
    • Water bath with non corrosive tank pate.
    • Feature of protection for over temperature for heater.
    • Individual vessels centring is possible.
    • Power failure indication program is incorporated.
    • Wobble and vibration free instrument.
    • Number of vessels: VDA 6D – 6/VDA 8D – 8.
    • Stirrer RPM: 25 – 200.
    • Speed accuracy: Better than ±1 RPM.
    • Stirrer depth adjustment: 25mm.
    • Test time interval: 1 minute to 23.59 Hours.
    • Temperature range: 3° C above room temperature – upto 40° C.
    • Temperature resolution: ±0.1° C.
    • Tank capacity: 45 Litres (approx).
    • Vessel capacity: 1 Litre.
    • Heating device: Spread-out immersion type.
    • Display: Graphic 128 × 64 LCD Display.
    • Input: 6 × 3 feather touch membrane keyboard.
    • Printer: Parallel Interface for 80 Columns Dot Matrix Printer.
    • Dimension: 625 mm × 540 mm × 640 mm and 850 mm (Total height when platform is positioned at topmost level).
    • Weight: 45 Kg.
    • Power: 230 V, 50 Hz, 2.5 KW (max)
    • Optional accessories: Accessories for apparatus 5, 6 will be supplied at extra cost.
  • Tablet Disintegration Apparatus

    Tablet Disintegration ApparatusAll the models of Disintegration Test Apparatus meet International Standards with respect to calibration, Validation and IQ, OQ requirements.

    • Equipped with individual maintenance free stepper motors to drive baskets up/down independently.
    • Dual channels temperature monitoring system to ensure precise temperature control of the tank and to display temperature of both the beakers.
    • 'PAUSE' facility: This facility permits to check disintegration state of the tablets intermittently and continue test without disturbing test parameters.
    • Two different batch products can be analyzed simultaneously.
    • Beaker temperature of both baskets displayed individually.
    • Memory to store 25 tests method parameters.
    • Wobble and vibration free instrument.
    • Number of beakers: 2 (1000ml Glass Beakers).
    • Number of baskets: 2 (Each containing 6 glass tubes and 6 guided discs, designed as per USP, IP and BP standards).
    • Number of cycles: 30 cycles/min.
    • Stroke length: 55 ±2mm.
    • Timer maximum interval setting: 4 Hours.
    • Temperature range: Room Temperature to 45°C
    • Temperature resolution: ±0.2°C
    • Display: Informative 128 × 64, blue graphic LCD display
    • Input: Tactile Keypad.
    • Printer: Parallel Interface for 80 Columns Dot Matrix Printer.
    • Dimensions (L × W × H): 390 × 360 × 570mm
    • Weight: 20Kg.
    • Power supply: 230V, 50Hz, 1KW max.
© C. Abhaykumar & Co. All Rights Reserved (Terms of Use)
Back to Top